AQUA LIGHT Deionization Filter DI-3300

Описание

AQUA LIGHT Kieselsäurefilter-S, Deionization Filter DI-3300"

Reliable water filter for water softening and demineralization.

The Aqualight demineralization filter is based on resin. It demineralizes and softens water of your reverse osmosis system.

This filter is developed to get high quality purified water which even meets industrial requirements.

Details

Application and effects of this filter for your reverse osmosis system

The demineralization filter once more clears the water that is already filtrated by the membrane until 99,99 % of substances are eliminated. After this thorough process of cleaning, your TDS value tends to 0 mg/l. The value of conductance (microsiemens) of your water should now be about 0,1 µS/cm.

Technical specifications of the In-Line Water Filter

  • Capacity: 1.893 Liter
  • Maximum flow rate: 200 l/24 h or 0,139 l/m
  • Maximum operation pressure: 6,9 bar
  • Maximum water temperature: 2 - 45 °C
  • Dimensions: Length: 28,5 cm; Diameter: 6,0 cm
  • for freshwater only


Deionization (DI) Filters take your reverse osmosis system to a higher level of filtration. It is an excellent inline filter, especially those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water. The post deionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% purity. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm

Продуктова форма

AQUA LIGHT Kieselsäurefilter-S, Deionization Filter DI-3300" Reliable water filter for water softening and demineralization. The Aqualight demineralization filter is based... Прочетете още

8 в наличност

€30,00 вкл. ДДС

    • Изпратено днес? Поръчайте в рамките на: Oct 30, 2026 17:00:00 +0200

    Описание

    AQUA LIGHT Kieselsäurefilter-S, Deionization Filter DI-3300"

    Reliable water filter for water softening and demineralization.

    The Aqualight demineralization filter is based on resin. It demineralizes and softens water of your reverse osmosis system.

    This filter is developed to get high quality purified water which even meets industrial requirements.

    Details

    Application and effects of this filter for your reverse osmosis system

    The demineralization filter once more clears the water that is already filtrated by the membrane until 99,99 % of substances are eliminated. After this thorough process of cleaning, your TDS value tends to 0 mg/l. The value of conductance (microsiemens) of your water should now be about 0,1 µS/cm.

    Technical specifications of the In-Line Water Filter

    • Capacity: 1.893 Liter
    • Maximum flow rate: 200 l/24 h or 0,139 l/m
    • Maximum operation pressure: 6,9 bar
    • Maximum water temperature: 2 - 45 °C
    • Dimensions: Length: 28,5 cm; Diameter: 6,0 cm
    • for freshwater only


    Deionization (DI) Filters take your reverse osmosis system to a higher level of filtration. It is an excellent inline filter, especially those who live in areas with exceptionally high levels of TOTAL DISSOLVED SOLIDS (TDS) in their tap water. The post deionizer takes the small percentage of contaminants that the membrane could not remove and filters this to greater than 99.99% purity. It will give you 0 ppm TDS, Conductivity attainable less than 0.1uS/cm or resistivity of close to 18 meg.ohm

    Последно разглеждани продукти

    © 2026 Aquariumprime Ltd., Осъществено от Shopify

      Вход

      Забравена парола?

      Все още нямате акаунт?
      Създай акаунт